Feral Jundi

Tuesday, September 20, 2011

DIY: 3D Printable AR-15 Magazine

Filed under: Cool Stuff,DIY,Weapons Stuff — Tags: , , , , , — Matt @ 11:44 AM

Now just as a disclaimer, I am not at all saying that this thing is safe or a good magazine to use for actual field work or the range. But, what it is good for is modeling and giving life to an idea.

On the other hand, this technology and the materials used are only getting better/cheaper/stronger/lighter. So there might be a day where you are hanging out on a forum like Lightfighter, and exchanging notes with other ‘makers’ about how to make cool new weapon and equipment parts using a 3D printer. You already see that on forums like this when it comes to textiles and sewing.

I also mentioned in the past about using a 3D printer to make UAV’s, or how SOCOM was interested in using this technology. With the examples below, the thing I was thinking about is using these printers to make the obscure little plastic parts that are essential in all types of equipment being used out there. Lots of ideas for this stuff and we will see how it evolves. –Matt

 

AR-15 Rifle Magazine
by crank
This thing is a Work in Progress.
Expect the files and instructions for this thing to change.
Description
Print at YOUR OWN RISK, Neither the creator of this object nor thingiverse.com is responsible for anything that happens because you printed this object! ?This is a near fully printable 5.56mm X 45mm or .233 REM AR-15 magazine. It is current only a 5 round magazine. I left my printed spring design out on purpose for saftey reasons. However, with a little printing experimention and some range time it can be made easily.?What is included is the magazine body, anti-tilt follower, and floorplate. ?I have used this magazine, no jams or feed problems….. YET. It works, but be reminded it is only a printed ABS magazine. If you end up using a printed ABS mag spring be prepared for stress relaxation of the polymer over time, especailly if it is kept loaded over a long period of time.
Instructions
Print at YOUR OWN RISK, Neither the creator of this object nor thingiverse.com is responsible for anything that happens because you printed this object! ?Well, the zombies are at it again………and you forgot your magazines out in your vehicle. Doh!?1) You Have a need for an 5.56mm X 45mm AR-15 magazine.

(more…)

Powered by WordPress